Model: 236 652 90
6-inch Motors - Standard
| Performance Curves: | |
| Outline Drawing: | |
| Horsepower: | 10 |
| Voltage: | 200-208 |
| Frequency: | 60 |
| Phase: | Three-Phase |
| RPM: | 3450 |
| Service Factor: | 1.15 |
| Subtrol Heat Sensor: | |
| Rotation: | |
| Packing: Pallet=P, Single=S | |
| Poles: | 2 |
| Downward Thrust (lbs): | |
| Max. Ambient Temp.: | 86°F / 30°C |
| Duty Rating: | Continuous at 0.5 ft/sec flow past motor |
| Construction: | Water Well |
| Length (inches): | 25.4 |
| Shipping Weight (lbs / kg): | 116 / 53 |
| Carton Size: | 7.50 x 10.75 x 34.50 |
| Castings: | |
| Stator Shell: | 300 SS Series |
| Stator Ends: | Carbon Steel |
| Shaft Extension: | 300 SS Series (5-30 Hp), 17-4 SS (40-60 Hp) |
| Fasteners: | |
| Seal: | |
| Seal Cover: | |
| Slinger: | Nitrile ( 5-40 Hp) Viton (50-60 Hp) |
| Thrust Bearings: | |
| Lead in Motor: | |
| Leads: | 3 |
| Lead Wire (or Cable): | XLPE |
| Wire Size: | #10 w/GND |
| Lead Potting: | Epoxy |
| Lead Sleeve: | |
| Lead Jam Nut: | Brass |
| Diaphragm: | Nitrile ( 5-40 Hp) Viton (50-60 Hp) |
| Diaphragm Cover: | 300 SS Series |
| Diaphragm Cup: | |
| Diaphragm Spring: | 300 SS Series |
| Filter: | |
| Insulation: | Class F |
| Pipe Plug: | |
For specifications not included on this page, please contact Franklin’s Technical Service Hotline at 800.348.2420