Model: 276 691 00
6-inch Motors - Hi-Temp 90
| Performance Curves: | |
| Outline Drawing: | |
| Horsepower: | 7.5 |
| Voltage: | 415 |
| Frequency: | 50 |
| Phase: | Three-Phase |
| RPM: | 2875 |
| Service Factor: | 1 |
| Subtrol Heat Sensor: | |
| Rotation: | |
| Packing: Pallet=P, Single=S | |
| Poles: | 2 |
| Downward Thrust (lbs): | |
| Max. Ambient Temp.: | 195°F / 90°C |
| Duty Rating: | Continuous at 0.5 ft/sec flow past motor* |
| Construction: | Hi-Temp 90C |
| Length (inches): | 28.96 |
| Shipping Weight (lbs / kg): | 129 / 58.6 |
| Carton Size: | 8.75 x 11.25 x 37.00 |
| Castings: | |
| Stator Shell: | 300 SS Series |
| Stator Ends: | Carbon Steel |
| Shaft Extension: | 300 SS Series (5-20 Hp), 17-4 SS (25-60 Hp) |
| Fasteners: | |
| Seal: | |
| Seal Cover: | |
| Slinger: | Viton®
Viton® is a registered trademark or trademarks of E. I. du Pont de Nemours and Company |
| Thrust Bearings: | |
| Lead in Motor: | |
| Leads: | 3 |
| Lead Wire (or Cable): | XLPO |
| Wire Size: | #8 w/GND |
| Lead Potting: | Epoxy |
| Lead Sleeve: | |
| Lead Jam Nut: | Brass |
| Diaphragm: | Viton® |
| Diaphragm Cover: | 300 SS Series |
| Diaphragm Cup: | |
| Diaphragm Spring: | 300 SS Series |
| Filter: | |
| Insulation: | Class F |
| Pipe Plug: | |
For specifications not included on this page, please contact Franklin’s Technical Service Hotline at 800.348.2420