Model: 239 108 62
8-inch Motors - Standard
| Performance Curves: | |
| Outline Drawing: | |
| Horsepower: | 200 |
| Voltage: | 460/380-415 |
| Frequency: | 60/50 |
| Phase: | Three-Phase |
| RPM: | 3525 |
| Service Factor: | 1.15/1.0 |
| Subtrol Heat Sensor: | YES |
| Rotation: | |
| Packing: Pallet=P, Single=S | |
| Poles: | 2 |
| Downward Thrust (lbs): | |
| Max. Ambient Temp.: | 86°F / 30°C |
| Duty Rating: | Continuous at 0.5 ft/sec flow past motor |
| Construction: | Corrosion Resistant 316 SS Construction |
| Length (inches): | 94.8 |
| Shipping Weight (lbs / kg): | 1040 / 473 |
| Carton Size: | 17 x 9.25 x 108 |
| Castings: | |
| Stator Shell: | 316 SS |
| Stator Ends: | 316 SS |
| Shaft Extension: | Per Standard Water Well |
| Fasteners: | |
| Seal: | |
| Seal Cover: | |
| Slinger: | Per Standard Water Well |
| Thrust Bearings: | |
| Lead in Motor: | |
| Leads: | 3 |
| Lead Wire (or Cable): | Per Standard Water Well |
| Wire Size: | #2 w/o GND |
| Lead Potting: | Per Standard Water Well |
| Lead Sleeve: | |
| Lead Jam Nut: | 316SS Jam Nut (40-125Hp) 316SS Plate (150-200Hp) |
| Diaphragm: | Per Standard Water Well |
| Diaphragm Cover: | 316 SS |
| Diaphragm Cup: | |
| Diaphragm Spring: | 316SS |
| Filter: | |
| Insulation: | |
| Pipe Plug: | |
For specifications not included on this page, please contact Franklin’s Technical Service Hotline at 800.348.2420