Hi-Temp 75

Franklin’s 6-inch and 8-inch submersible motors are typically used in large demanding water wells requiring high flow rates or deeper installations. These motors are tough, built to last, and come in a variety of construction options:

Standard – for most water wells

Sand Fighter™ - for wells with high levels of abrasives

Hi-Temp – for hot water and other harsh conditions

Stainless Steel – for aggressive water

These motors provide large amounts of water for irrigation, community water systems, and factories where large flows or pressures are required. We understand how important it is to produce reliable systems to avoid significant costs due to failure or downtime. Typical applications that rely on our motors include:

Agricultural
Municipal
Industrial
Mining
Booster
Reverse Osmosis

Oil & Gas

Applications

These motors are built for dependable operation in vertical 8” diameter or larger wells, in applications with higher temperature, higher thrust or low flow.

Features:

Up to 167 °F (75 °C) ambient temperature

25% increase in upthrust capability at 30 °C

25% increase in downthrust capability at 30 °C

Wet well, reservoir, low flow approved in 14” diameter or larger wells with ambient water up to 86 °F (30 °C)

High temperature leads

Hermetically-sealed stator

Innovative high temperature winding encapsulation system

FE water soluble, high temperature bearing lubrication

Double-flange NEMA mounting for ease of handling and pump mounting

Stainless steel splined shaft for maximum shaft/coupling contact

Full 3450 RPM 60 Hz design point for superior pump performance

Sand Fighter sealing system

Franklin Electric’s exclusive Water Bloc™ lead connection

316 SS and wye-delta designs available – consult factory

Filter Results: HP: Construction: Phase:

Hp	Kw	Construction	W/PH	Volts	Hz	S.F	Model No.	Wire Size	Power Wires
40	30	WATER WELL with Sand Fighter Seal	Three-Phase	380	60	1.15	279 160 90	#2	3 No Ground
40	30	WATER WELL with Sand Fighter Seal	Three-Phase	380	60	1.15	279 600 90	#2	6-90° No Ground
40	30	WATER WELL with Sand Fighter Seal	Three-Phase	460/380-415	60/50	1.15/1.0	279 100 90	#2	3 No Ground
40	30	WATER WELL with Sand Fighter Seal	Three-Phase	460/380-415	60/50	1.15/1.0	279 120 90	#2	6-90° No Ground
40	30	WATER WELL with Sand Fighter Seal	Three-Phase	575	60	1.15	279 110 90	#2	3 No Ground
40	30	WATER WELL with Sand Fighter Seal	Three-Phase	575	60	1.15	279 190 90	#2	6-90° No Ground
40	30	316 SS	Three-Phase	460/380-415	60/50	1.15/1.0	279 100 92	#2	3 No Ground
50	37	WATER WELL with Sand Fighter Seal	Three-Phase	380	60	1.15	279 161 90	#2	3 No Ground
50	37	WATER WELL with Sand Fighter Seal	Three-Phase	380	60	1.15	279 601 90	#2	6-90° No Ground
50	37	WATER WELL with Sand Fighter Seal	Three-Phase	460/380-415	60/50	1.15/1.0	279 101 90	#2	3 No Ground
50	37	WATER WELL with Sand Fighter Seal	Three-Phase	460/380-415	60/50	1.15/1.0	279 121 90	#2	6-90° No Ground
50	37	WATER WELL with Sand Fighter Seal	Three-Phase	575	60	1.15	279 111 90	#2	3 No Ground
50	37	WATER WELL with Sand Fighter Seal	Three-Phase	575	60	1.15	279 191 90	#2	6-90° No Ground
50	37	316 SS	Three-Phase	460/380-415	60/50	1.15/1.0	279 101 92	#2	3 No Ground
60	45	WATER WELL with Sand Fighter Seal	Three-Phase	380	60	1.15	279 162 90	#2	3 No Ground
60	45	WATER WELL with Sand Fighter Seal	Three-Phase	380	60	1.15	279 602 90	#2	6-90° No Ground
60	45	WATER WELL with Sand Fighter Seal	Three-Phase	460/380-415	60/50	1.15/1.0	279 102 90	#2	3 No Ground
60	45	WATER WELL with Sand Fighter Seal	Three-Phase	460/380-415	60/50	1.15/1.0	279 122 90	#2	6-90° No Ground
60	45	WATER WELL with Sand Fighter Seal	Three-Phase	575	60	1.15	279 112 90	#2	3 No Ground
60	45	WATER WELL with Sand Fighter Seal	Three-Phase	575	60	1.15	279 192 90	#2	6-90° No Ground
60	45	316 SS	Three-Phase	460/380-415	60/50	1.15/1.0	279 102 92	#2	3 No Ground
75	55	WATER WELL with Sand Fighter Seal	Three-Phase	380	60	1.15	279 163 90	#2	3 No Ground
75	55	WATER WELL with Sand Fighter Seal	Three-Phase	380	60	1.15	279 603 90	#2	6-90° No Ground
75	55	WATER WELL with Sand Fighter Seal	Three-Phase	460/380-415	60/50	1.15/1.0	279 103 90	#2	3 No Ground
75	55	WATER WELL with Sand Fighter Seal	Three-Phase	460/380-415	60/50	1.15/1.0	279 123 90	#2	6-90° No Ground
75	55	WATER WELL with Sand Fighter Seal	Three-Phase	575	60	1.15	279 113 90	#2	3 No Ground
75	55	WATER WELL with Sand Fighter Seal	Three-Phase	575	60	1.15	279 193 90	#2	6-90° No Ground
75	55	316 SS	Three-Phase	460/380-415	60/50	1.15/1.0	279 103 92	#2	3 No Ground
100	75	WATER WELL with Sand Fighter Seal	Three-Phase	380	60	1.15	279 164 90	#2	3 No Ground
100	75	WATER WELL with Sand Fighter Seal	Three-Phase	380	60	1.15	279 604 90	#2	6-90° No Ground
100	75	WATER WELL with Sand Fighter Seal	Three-Phase	460/380-415	60/50	1.15/1.0	279 104 90	#2	3 No Ground
100	75	WATER WELL with Sand Fighter Seal	Three-Phase	460/380-415	60/50	1.15/1.0	279 124 90	#2	6-90° No Ground
100	75	WATER WELL with Sand Fighter Seal	Three-Phase	575	60	1.15	279 114 90	#2	3 No Ground
100	75	WATER WELL with Sand Fighter Seal	Three-Phase	575	60	1.15	279 194 90	#2	6-90° No Ground
100	75	316 SS	Three-Phase	460/380-415	60/50	1.15/1.0	279 104 92	#2	3 No Ground
125	93	WATER WELL	Three-Phase	380	60	1.15	279 165 90	#2	3 No Ground
125	93	WATER WELL	Three-Phase	380	60	1.15	279 605 90	#2	6-90° No Ground
125	93	WATER WELL	Three-Phase	460/380-415	60/50	1.15/1.0	279 105 90	#2	3 No Ground
125	93	WATER WELL	Three-Phase	460/380-415	60/50	1.15/1.0	279 125 90	#2	6-90° No Ground
125	93	WATER WELL	Three-Phase	575	60	1.15	279 115 90	#2	3 No Ground
125	93	316 SS	Three-Phase	460/380-415	60/50	1.15/1.0	279 105 92	#2	3 No Ground
150	110	WATER WELL	Three-Phase	380	60	1.15	279 166 90	#2	3 No Ground
150	110	WATER WELL	Three-Phase	380	60	1.15	279 606 90	#2	6-90° No Ground
150	110	WATER WELL	Three-Phase	460/380-415	60/50	1.15/1.0	279 106 90	#2	3 No Ground
150	110	WATER WELL	Three-Phase	460/380-415	60/50	1.15/1.0	279 126 90	#2	6-90° No Ground
150	110	WATER WELL	Three-Phase	575	60	1.15	279 116 90	#2	3 No Ground
150	110	316 SS	Three-Phase	460/380-415	60/50	1.15/1.0	279 106 92	#2	3 No Ground

8-Inch Hi-Temp 75 Motor Specifications

HZ	Wire/Phase	HP RANGE	KW RANGE	Poles	RPM	Max. Ambient Temp.	Duty Rating
60	Three-Phase	40 - 150	30 - 110	2	3525	167°F / 75°C	Continuous at 0.5 ft/sec flow past motor*
50	Three-Phase	40 - 150	30 - 110	2	2900	167°F / 75°C	Continuous at 0.5 ft/sec flow past motor*

Hi-Temp 75 Motor Dimensions

HP	KW	Length (inches)	LBS	KG	Motor Carton Size
40	30	44.8	400	182	17 x 9.25 x 51
50	37	49.8	455	207	17 x 9.25 x 64
60	45	57.3	555	252	17 x 9.25 x 64
75	55	68.8	700	318	17 x 9.25 x 79
100	75	77.8	840	382	17 x 9.25 x 96
125	93	85.8	925	421	17 x 9.25 x 96
150	110	94.8	1040	473	17 x 9.25 x 108

6-Lead Models Available (Add 5 LBS to Shipping Weight)

MODEL NO.	JAM NUT MATERIAL	LENGTH (IN/FT)	LENGTH (M)	WIRE SIZE	Fits FE Motor Rating (460V, 60Hz)	Replacement Kit No.	Power Wires
165 617 901	316 SS	13FT	4	#2	150-200 Hp 110-150 kW	305 315 901	3 No Ground
165 617 902	316 SS	26FT	8	#2	150-200 Hp 110-150 kW	305 315 902	3 No Ground

Series Documents

AIM Manual: 60 Hz AIM Manual
AIM Manual: Form 2207: Sub Motor Install Record
Information Library: Irrigation & Industrial Pumps Engineering Manual

Product Documents

Brochure: 8 in Hi-Temp 75 Brochure
Catalog Pages: 8 in Hi-Temp 75 Catalog pages

6 - 8 in Submersible Motors

6-Inch

8-Inch