Water Systems

DDS Series

Features:

  • 304SS case and seal plate
  • Glass filled thermoplastic impeller for increased efficiency and dependable high temperature operation
  • Back pull-out design provides access to internal parts without disturbing the plumbing
  • Viton® mechanical shaft seal for added chemical resistance
  • Maximum temperature limit of 140 °F and maximum working pressure of 150 psi
  • Square-flange open drip-proof motor for easy service and reliability
  • Available in single- and three-phase models
  • Enclosed impeller design for increased efficiencies
  • Chemical resistant thermoplastic impeller
HPPump ModelOrder No.Suction x DischargeWireWt.
1/25FPDDS1-S931780561.25" x 1"Single-Phase27.00
3/47FPDDS1-S931780641.25" x 1"Single-Phase31.00
3/47FPDDS1-T931781061.25" x 1"Three-Phase31.00
11FPDDS1-S931780721.25" x 1"Single-Phase33.00
11FPDDS1-T931781141.25" x 1"Three-Phase33.00
1.515FPDDS1-S931780801.25" x 1"Single-Phase38.00
1.515FPDDS1-T931781221.25" x 1"Three-Phase38.00
25FPDDS1-T931780981.25" x 1"Three-Phase48.00
HP RangeModel No.Order No.Suction x DischargeWireMotor-Frame SizeMax. Imp. DiameterWt.
2FPDDD1-1/4-K193174137R3581.50" X 1.25"1 or 356Z5.65"15
2.5FPDDD1-1/2-K193174137R3682.00" X 1.50"1 or 356Z5.95"14
1/2 - 1.5FPDDD1-K193174137R3481.25'' X 1"1 or 356Z5.315"12
1/2 - 1.5FPDDS1-K193174137R3781.25'' x 1'1 or 356Z5.315"12
HPSuct. (NPT)Disch.(NPT)ABCDEFGH
1/21.25"1"14 11/16"2 3/8"5 5/16"4 7/16"3.5"4 5/8"8.75"5.5"
3/41.25"1"14 11/16"2 3/8"5 5/16"4 7/16"3.5"4 5/8"8.75"5.5"
3/41.25"1"14 11/16"2 3/8"5 5/16"4 7/16"3.5"4 5/8"8.75"5.5"
11.25"1"14 11/16"2 3/8"5 5/16"4 7/16"3.5"4 5/8"8.75"5.5"
11.25"1"14 11/16"2 3/8"5 5/16"4 7/16"3.5"4 5/8"8.75"5.5"
1.51.25"1"15 3/16"2 3/8"5 5/16"4 7/16"3.5"4 5/8"8.75"5.5"
1.51.25"1"15 3/16"2 3/8"5 5/16"4 7/16"3.5"4 5/8"8.75"5.5"
21.5"1.25"16 11/16"2 13/16"6 1/8"5.00"3 9/16"5"9 1/8"6 5/16"