Water Systems

FPS Pumps

Jet Pump Accessories

225A Jet Charger


Features:

  • Specifically designed to prevent water-logging typically associated with a conventional galvanized pressure tank.
  • Automatically maintains a proper balance of air and water volume in the tank.
  • Eliminates frequent starts and stops, thus extending motor life and reducing power consumption
  • Eliminates tank draining normally required with waterlogged tanks.
  • Eliminates need for other costly equipment.
  • Unit consists of 225A jet charger, reducer bushing, adapter nut, 3/8" polyethylene tubing and male connector.
MODEL NO.ORDER NO.WT.
225A9190-80122

Deep Well 2-Pipe Injectors for 4" Wells

SUCTION LIFTORDER NO.WT.
30 - 60 ft147E11207
50 - 100 ft147E09157
30 - 60 ft147E10237
50 - 100 ft147E11187
30 - 60 ft147E11257
50 - 100 ft147E11207
60 - 90 ft147E11157
30 - 60 ft147E11187
30 - 60 ft147E11237
60 - 90 ft147E11187
30 - 60 ft147E09197
60 - 90 ft147E10187
20 - 60 ft147E11247
60 - 90 ft147E09147
20 - 60 ft147E10187
50 - 90 ft147E10197
80 - 120 ft147E09147
60 - 90 ft147E11177
20 - 60 ft147E09167

Convertible VersaJet Deep Well 2-Pipe Injector Kits for 4 " Wells:

Model No.Order No.Wt
DW19615200112.6
DW29615200212.6
DW39615200312.6
DW49615200412.6
DW59615200512.6

Deep Well kit includes deep well injector assembly, K1-S suction flange, and hardware.

Valves

DESCRIPTIONORDER NO.WT.
4-in-1 Foot Valve, 3/4" - 1-1/2"213391
Cast Iron Horizontal Check Valve, Poppet Type Bronze, 1-1/4" F x 1-1/4" M919806804

Scew-In Shallow Well Injectors

INJ. CODEORDER NO.WT.
101718120012R0.5
102318124701R0.5
103418124800R0.5
102418127803R0.5
102718127902R0.5
102818128009R0.5
123418170100R0.5

Convertible VersaJet Shallow Well Injector Kits:

Model No.Order No.Wt
SW19615100111.7
SW29615100211.7
SW39615100311.7
SW49615100411.7
SW59615100511.7
SW69615100611.7
SW79615100711.7

Shallow Well kit includes shallow well injector assembly, K1-S suction flange, and hardware.

Pressure Switches

DESCRIPTIONPSI SETTINGORDER NO.WT.
Global Series20/40PRSW20401
Global Series30/50PRSW30501
Global Series40/60PRSW40601
Furnas Pro Series20/4069ES1AZ20401
Furnas Pro Series30/5069ES1AZ30501
Furnas Pro Series40/6069ES1AZ40601
Pressure Gauge, 0-100 psi, 1/4" b.m 9193-40181

AQ80


Features:

  • Constant pressure at flow rates of 1/2 gpm or higher, eliminated the annoying pressure fluctuations common with pump/tank systems.
  • Pump runs continuously while service is needed, eliminating short cycling, the major cause of motor wear and failure.
  • Handles flow rates up to 20 gpm. For flow rates above 20 gpm, AquaGenies may be connected in parallel to handle each 20 gpm increment.
  • Retrofit to any exisitng pump & pressure tank system.
MODEL NO.DESCRIPTIONORDER NO.
AQ80Inlet: 1", Outlet: 1", Tank Connection: 1", Max. Inlet Pressure: 80 psi91987321