Convertible VersaJet

Taking versatility to a deeper level. Although no single pump can meet all applications, the convertible VersaJet from Franklin Electric comes close. Each model can be configured with a variety of pressure and flow choices in both shallow and deep set installations. In addition, four different suction flange options make this pump the contractor’s choice for those tough replacement jobs.

Features:

Heavy-Duty cast-iron case ensures optimum durability and long life
Modular Suction Flange system to retro fit current installations without disturbing the existing plumbing
Thermoplastic Impeller and diffuser precision molded for high efficiency and dependability
Carbon/Ceramic mechanical shaft seal ensures leak proof fit and continuous water lubrication
Adjustable pressure switch is factory set at 30/50 psi
Powered by high quality, industry proven, UL778 approved indoor/outdoor motor from AO Smith
Dual voltage motor can be set to run at either 115V or 230V
Built in drain plug for easy winterization and servicing
Connections:
- 1.25" FNPT Suction
- 1" FNPT Discharge
- 1" FNPT Drive Line

Filter Results: HP:

Model No.	HP	Suction x Discharge	Voltage	Order No.	Wt
SCVJ05CI	1/2	1" x 1.25"	115/230	96110005	36.10
SCVJ07CI	3/4	1" x 1.25"	115/230	96110007	39.30
SCVJ10CI	1	1" x 1.25"	115/230	96110010	41.60
SCVJ15CI	1.5	1" x 1.25"	115/230	96110015	46.00

Note:

Order suction flange kit A , or shallow well kit B , or deep well kit C depending upon application.
Minimum inside well diameter requirement of 4” for deep well injectors.
Control valve required for deep well installations.

Suction Flange Kits (Modular Face Plates):

Model No.	Order No.	Wt
K1 - S	96150946	7.8
K2 - G	96150947	8.1
K3 - F	96150948	8
K4 - M	96150949	8.4

Flange Kits are designed for use in deep set retrofit application where pump is being replaced but Injector assembly is staying in the well.

Shallow Well Injector Kits:

Model No.	Order No.	Wt
SW1	96151001	11.7
SW2	96151002	11.7
SW3	96151003	11.7
SW4	96151004	11.7
SW5	96151005	11.7
SW6	96151006	11.7
SW7	96151007	11.7

Shallow Well kit includes shallow well injector assembly, K1-S suction flange, and hardware.

Deep Well Injector Kits:

Model No.	Order No.	Wt
DW1	96152001	12.6
DW2	96152002	12.6
DW3	96152003	12.6
DW4	96152004	12.6
DW5	96152005	12.6

Deep Well kit includes deep well injector assembly, K1-S suction flange, and hardware.

Control Valve:

Model No.	Order No.	Wt
DW-CV	96150951	1.9

Control valve required for deep well installations.

Model No.	HP	A	B
SCVJ05CI	1/2	9.63"	13.31"
SCVJ07CI	3/4	10.38"	14.06"
SCVJ10CI	1	11.00"	13.68"
SCVJ15CI	1.5	11.88"	15.56"

Part No.	C	D	F	G
177949101	5.81/4.20	3.46/1.85	1-1/4" NPT	1-1/4" NPT
177948101	5.81/4.20	3.81/2.20	1-1/4" NPT	1" NPT
177947101	5.81/4.20	3.00/1.39	1-1/4" NPT	1" NPT
177946101	5.81/4.20	3.93/2.32	1-1/4" NPT	1" NPT

Complete Parts Listing
Jet Pump Accessories

Note:

Order suction flange kit A , or shallow well kit B , or deep well kit C depending upon application.
Minimum inside well diameter requirement of 4” for deep well injectors.
Control valve required for deep well installations.